Anritsu MS2724B RF Spectrum Analyzers


Handheld 20GHz Spectrum Analyser

Frequency range : 9 kHz to 6 GHz
Resolution Bandwidth : 300 Hz to 10 MHz
Noise Floor/Dynamic range : -152 dBm to 20 dBm
There are no products.
Live Inventory Check:

The MS2724B handheld spectrum analyzer is designed to conduct highly accurate analysis on the new wave of wireless LAN and cellular signals, including 802.11a, 3G, ultra-wideband, and wireless medical patient monitoring systems. The next generation of Anritsu's best selling Spectrum Master, the MS2724B is a small and easy to use portable spectrum analyzer with unprecedented measurement capability for applications up to 20 GHz.

Weighing in at less than 8 pounds, it is equally at home on the engineering bench and in the field. It is ideally suited for measuring up to the fifth harmonic of 3G cellular phone base stations.

Several smart measurements are built into the MS2724B including channel power, adjacent channel power ratio, Carrier to Interference ratio (C/I), and field strength. In addition, an AM/FM/SSB demodulator is included. Demodulated signals can be monitored using the internal speaker or by using a universal 2.5 mm 3-wire headset, such as used with many cellular telephones.

The MS2724B spectrum analyzer has low phase noise of -104 dBc/Hz typical at 1 GHz @ 10 kHz offset, best in its class typical DANL of -159 dBm at 1 GHz in a 1 Hz RBW, resolution bandwidth (RBW) range of 1 Hz to 3 MHz and video bandwidth (VBW) range of 1 Hz to 3 MHz. It also has the fastest sweep speeds of any spectrum analyzer in its class.

Store over 1000 test set-ups and measurements internally. The use of Compact Flash memory modules or USB Flash Drives allow an unlimited number of traces and setups to be stored. Measurements may be stored directly to the compact flash module. A 512 MB module will hold over 20,000 Spectrum Analyzer measurements. Remote programming using the Ethernet 10/100 Base-T connection is provided using SCPI programming. The Ethernet connection gives the user flexibility in remotely operating the instrument using Anritsu's remote access software, shipped with the product. Measurements and setups may be uploaded and downloaded using either the Ethernet or the USB connection.

Quasi-peak detection is included along with CISPR resolution bandwidth.
Multilingual User Interface (English, Chinese, French, German, Japanese, Spanish, Korean, Italian)


·         Handheld, battery-operated design

·         Best in class Displayed Average Noise Level < -159 dBm typical in a 1 Hz resolution bandwidth at 1 GHz

·         RBWs: 1 Hz to 3 MHz in 1-3 sequence, VBWs: 1 Hz to 3 MHz in 1-3 sequence

·         Normal, Max hold, Min hold, user settable trace averaging. Three traces.

·         6 Markers plus 6 delta markers or choose one marker with 6 delta markers 

·         Multi-segmented upper and lower limit lines

Anritsu Spectrum Master Series Products

ANMS2724C - High Performance Handheld Spectrum Anaylzer, 9 kHz to 20GHz
MS2711B - Handheld 3GHz Spectrum Analyser
MS2711D - Handheld 3GHz Spectrum Analyser
MS2711E - Spectrum Master, 9 kHz to 3 GHz Spectrum Analyzer
MS2712E - Spectrum Master, 9 kHz to 4 GHz Spectrum Analyzer
MS2713E - Spectrum Master, 9 kHz to 6 GHz Spectrum Analyzer
MS2719B - 9 kHz - 20GHz Microwave Spectrum Analyser
MS2721A - Handheld 7.1GHz Spectrum Analyser
MS2721B - High Performance Handheld Spectrum Anaylzer, 9 kHz to 7.1 GHz
MS2724B - Handheld 20GHz Spectrum Analyser
MS2725C - High Performance Handheld Spectrum Anaylzer, 9 kHz
MS2726C - High Performance Handheld Spectrum Anaylzer, 9 kHz
Ask a Microlease Expert

Item has been added to your Quote Cart.

Item has been added to your Shopping Cart.