Keysight (Agilent) Technologies 83496B Optical Sampling scopes

KEYSIGHT (AGILENT) TECHNOLOGIES 83496B

Clock recovery module

Wavelength range : 750 nm to 1650 nm
QUICK QUOTE
    Qty
  
  
  
SUBMIT
CLOCK RECOVERY MODULE
  • Optical and electrical inputs, 50 Mb/s - 7.1 Gb/s
  • Rate, extend maximum, from 7.1 GB/S TO 14.2 GB/S
  • Bandwidth, adjustable loop
Live Inventory Check:
83496B PRODUCT OVERVIEW  
 

Description

The 83496B Clock Recovery Module with Phase Noise Analysis provides increased eye-mask and jitter measurement accuracy with breakthrough performance in clock recovery circuitry. It provides ideal performance for waveform analysis with the 86100C Digital Communications Analyzer and can derive a clock from signals with rates as low as 50 Mb/s-14.2 GB/s*, and any rate in between. At under 300 femtoseconds rms, the residual jitter of the output clock is virtually negligible, allowing accurate measurements of very low levels of signal jitter. Jitter spectrum and phase noise analysis on clock and data signals is available through a downloadable external application (www.agilent.com/find/jtf)

* Requires 86100C DCA-J Firmware Revision A.08.10 or later



Key Specification

Optical clock recovery (option 101 only)

  • Inputs & outputs: 9/125 µm (single-mode) to 62.5/125 µm (multimode)
  • Wavelength range: 1250-1650 nm (single-mode), 750-1330 nm (multimode)
  • Minimum optical modulation amplitude: -11 dBm (1310/1550 single-mode), -10 dBm (1310 multimode), -8 dBm (850 multimode)

Electrical clock recovery (option 100 only)

  • Inputs: single-ended or differential, 3.5 mm (m) connectors
  • Outputs (option 100 only): single-ended or differential, 3.5 mm (m) connectors
  • Minimum electrical input level: 75 mVpp

Continuous unbanded tuning from 50 Mb/s up to 14.2 Gb/s

  • Golden PLL operation (option 300) with a tunable loop bandwidth from 15 KHz to 10 MHz
  • Ultra low residual jitter: < 300 fs rms (characteristic at 10 Gb/s)
  • High gain for tracking spread-spectrum signals
  • Phase noise analysis of clock or data signals

Compatibility

  • 86100C Infiniium DCA-J Mainframe
  • 86100D Infiniium DCA-X Mainframe

83496B OPTIONS (12)
94675False94676False94677False94678False94679False94680False94683False94684False94686False75725False78134False230750False
83496B-100 Electrical inputs, 50 Mb/s - 7.1 Gb/s
83496B-101 Optical and electrical inputs, 50 Mb/s - 7.1 Gb/s
83496B-200 Rate, extend maximum, from 7.1 GB/S TO 14.2 GB/S
83496B-201 Data rate, shift to 7.1-14.2 Gb/s only, no low range
83496B-300 Bandwidth, adjustable loop
83496B-C01 Combo Option, required for option 83496B-101
83496B-KIT-100 Kit-shipping OPT 100
83496B-KIT-101 Kit-Shipping Opt 101
83496B-UK6 Commercial calibration certificate with test data
R-50C-011-3 Calibration Assurance Plan - Return to Keysight - 3 years
R-50C-011-5 Calibration Assurance Plan - Return to Keysight - 5 years
R-51B-001-5Z Warranty Assurance Plan - Return to Keysight - 5 years
83496B RESOURCES LIBRARY  
 
83496B DOCUMENTS
83496B PRODUCT Q & A  
 
HAVE QUESTIONS ABOUT THIS PRODUCT?
Ask a Microlease Expert

Item has been added to your Quote Cart.

    
Item has been added to your Shopping Cart.

    
Item has been added to your Shopping Cart.