E5061B responds to various measurement needs, from LF to RF
The Agilent E5061B is a member of the ENA Series network analyzers. The E5061B addresses a broad range of measurement needs of electronic components and circuits from low to high frequencies. The E5061B now provides a new standard of frequency-domain device analysis from 5 Hz to 3 GHz.
- E5061B Brochure
- E5061B-3L5/005 Data Sheet
For full version flash demo, visit: www.agilent.com/find/e5061b
Trade your VNA and network/impedance analyzer toward the E5061B
RF NA Options: E5061B-115/117/135/137/215/217/235/237
Solid performance in an enhanced platform
The E5061B RF Network Analyzer options are the successors of the E5061/62A and they provide high-performance network analysis for testing RF components, including cellular BTS filters/antennas, MRI coils, RFIDs, and CATV components. A wide variety of test set options allows you to select the best configuration to suit your test requirements and budget.
LF-RF NA Option: E5061B-3L5
Comprehensive LF-to-RF network analysis
The E5061B-3L5 LF-RF NA option offers versatile network analysis in the broad frequency range from 5 Hz to 3 GHz. Comprehensive LF network measurement capabilities including built-in 1 MΩ inputs have been seamlessly integrated with the high-performance RF network analyzer. The E5061B-3L5 is the right solution for component and circuit evaluations in the R&D environment.
E5061B-3L5 LF-RF network analyzer option plus 005 impedance analysis option - NA plus ZA in one box
The E5061B-005 provides the impedance analysis (ZA) firmware for the E5061B-3L5 LF-RF network analyzer. This option enables the analyzer to measure impedance parameters of electronic components such as capacitors, inductors, and resonators. The combination of NA and ZA capabilities further enhances the analyzer’s versatility as a general R&D tool.
Test Set Options
50Ω RF NA Options:
Option 115 Transmission / Reflection test set, 100 kHz to 1.5 GHz
Option 135 Transmission / Reflection test set, 100 KHz to 3 GHz
Option 215 S-parameter test set, 100 kHz to 1.5 GHz
Option 235 S-parameter test set, 100 kHz to 3 GHz
75Ω RF NA Options:
Option 117 Transmission / Reflection test set, 100 kHZ to 1.5 GHz
Option 137 Transmisson / Reflection test set, 100 kHz to 3 GHz
Option 217 S-parameter test set, 100 kHz to 1.5 GHz
Option 237 S-parameter test set, 100 kHz to 3 GHz
LF RF NA Option
Option 3L5 5 Hz to 3 GHz
The E5061B does not support the control function for the discontinued 87075C/87050E multiport test set via parallel port.
The option number of the E5061B's standard hard disk drive has been changed from 019 to 020 as of November 1, 2010.
Support: ENA Series Service & Support Home Page
When you just can’t wait *
Evaluate the pre-configured E5061BEP ENA series network analyzer – express configuration
*Note: The ENA series network analyzer E5061BEP-express configuration is available to order from Distribution partners in the US, Canada, Latin America, China, Taiwan, India, Malaysia, Singapore, Thailand, and Korea.
- 100 kHz to 1.5 GHz / 3 GHz
- Transmission / Reflection test set and S-parameter test set
- 50 Ω and 75 Ω system impedance
LF-RF NA option
- 5 Hz to 3 GHz
- 50 Ω S-parameter test set
- Gain-phase test port (1 MΩ / 50 Ω inputs)
- DC-bias source
- Impedance analysis function (option 005)
Keysight (Agilent) Technologies ENA-L Series Vector Network Analyzers Products
- 1.5GHz Network Analyzer
- 3GHz Network Analyser